Service Department 2012 service rates
Call JP for more details 651-695-3781
Shop Rate = $90.00/hour
Oil & filter change - Plus $2.00 environmental fee $79.95 + materials
Generator oil & filter change - Plus $2.00 env. fee $59.95 + materials
Water separating fuel filters - change annually $44.95 + materials
With oil change $19.95 + materials.
Tune-ups:
4 cylinder = $99.95 + materials 6 cylinder = $109.95 + materials 8 cylinder = $119.95 + materials
Sterndrive Services:
Includes: Pull drive off boat & inspect all bellows, cables, & gimbal bearings, grease and inspect U-joints, check engine alignment, pressure and vacuum test, change lube & install with new gaskets. All services use mercury high performance gear lubes.
Alpha:
Change lower unit lube only $59.95 + materials
Drive service (description above) $109.95 + materials
Premium service (same as above plus separate gear cases, install raw water pump impeller and inspect pump housings, replace if necessary) $179.95 + materials
OMC Cobra $15.00 extra
Bravo I & II:
Change lower unit lube only $89.95 + materials
Drive service $149.95 + materials
Bravo III:
Change lower unit lube only $89.95 + materials
Drive service $179.95 + materials
Transmission Fluid Change: $59.95 + materials
Boat inspections:
Includes: Visual inspection of all belts, hoses, wiring, cables, boots, bellows, gel coat finishes, bilge cleanliness, upholstery, canvas, switches. Physically inspect fluids, electrical systems, pumps, lights, horns, water systems, heads, and other components, run engines.
Basic inspection – all items as listed above $85.00
Premium inspection – adds a compression test Single engine $170.00
Twin engine $255.00
w/ Generator add $42.50
Pressure & Vacuum test on all sterndrive models
Single drive $35.00
Twin drive $70.00
Bottom Paint:
Bottom Painting (10’ beam & under) $14.00/foot + materials
Sanding, scraping, all prep work, time & materials $85.00/hour
Cleaning:
Boat wash
Soap & water wash & towel dry $25.00/hour
Buff & wax $33.00/foot (most standard cruisers)
Bottom Prep (10’ beam & under for paint prep) $24.00/foot
To white metal Per estimate
All prices subject to change.